<?xml version="1.0" encoding="UTF-8"?><metadata>
<idinfo>
<citation>
<citeinfo>
<origin>Federal Emergency Management Agency</origin>
<pubdate>1998</pubdate>
<title Sync="TRUE">FEMAFloodData</title>
<geoform Sync="TRUE">vector digital data</geoform>
<pubinfo>
<pubplace>Washington, DC</pubplace>
<publish>
Federal Emergency Management Agency
Type_of_File: ARC/INFO Coverage
Filename: Q3
Metadata_Filename: c53065m
</publish>
</pubinfo>
<ftname Sync="TRUE">FEMAFloodData</ftname>
<onlink Sync="FALSE">withheld</onlink>
</citeinfo>
</citation>
<descript>
<abstract>
The Q3 Flood Data are derived from the Flood Insurance Rate Maps
(FIRMS) published by the Federal Emergency Management Agency (FEMA). The
file is georeferenced to earth"s surface using geographic projection
and decimal degree coordinate system. The specifications for the
horizontal control of Q3 Flood Data files are consistent with those
required for mapping at a scale of 1:24000.
</abstract>
<purpose>
The FIRM is the basis for floodplain management, mitigation, and
insurance activities for the National Flood Insurance Program (NFIP).
Insurance applications include enforcement of the mandatory purchase
requirement of the Flood Disaster Protection Act which "... requires the
puchase of flood insurance by property owners who are being assisted by
Federal programs or by Federally supervised, regulated or insured
agencies or institutions in the acquisition or improvement of land
facilities located or to be located in identified areas having special
flood hazards" (Section 2 (b) (4) of the 1973 Flood Disaster Protection
Act). In addition to the identification of Special Flood Hazard Areas,
the risk zones shown on the FIRMs are the basis for the establishment of
premium rates for flood coverage offered through the NFIP.
Q3 Flood Data files are intended to convey certain key features from the
existing hard copy FIRM to provide users with automated flood risk data.
Edge-matching errors, overlaps and deficiencies in coverage, and similar
problems are not corrected during digitizing or post-processing.
These data may be used to locate Special Flood Hazard Areas (SFHAs).
More detailed information may be obtained from the paper FIRM.
</purpose>
<langdata Sync="TRUE">en</langdata>
</descript>
<timeperd>
<timeinfo>
<sngdate>
<caldate>1998</caldate>
</sngdate>
</timeinfo>
<current>Publication date of sources</current>
</timeperd>
<status>
<progress>Complete</progress>
<update>Irregular</update>
</status>
<spdom>
<bounding>
<westbc Sync="TRUE">-118.429122</westbc>
<eastbc Sync="TRUE">-117.419719</eastbc>
<northbc Sync="TRUE">49.005483</northbc>
<southbc Sync="TRUE">47.786413</southbc>
</bounding>
<lboundng>
<leftbc Sync="TRUE">395466.541712</leftbc>
<rightbc Sync="TRUE">468566.497181</rightbc>
<bottombc Sync="TRUE">5293504.350618</bottombc>
<topbc Sync="TRUE">5428154.254837</topbc>
</lboundng>
</spdom>
<keywords>
<theme>
<themekt>None</themekt>
<themekey>FEMA Flood Hazard Zones</themekey>
<themekey>Q3 Flood Data</themekey>
<themekey>Q3 Coverage</themekey>
<themekey>Special Flood Hazard Areas</themekey>
<themekey>Digital Flood Insurance Rate Maps</themekey>
</theme>
<place>
<placekt>None</placekt>
<placekey>STEVENS</placekey>
<placekey>WA</placekey>
<placekey>USA</placekey>
</place>
</keywords>
<accconst>
None
Use_Restrictions: None. Acknowledgement of the Federal Emergency Management
Agency would be appreciated in products derived from these data.
</accconst>
<ptcontac>
<cntinfo>
<cntorgp>
<cntorg>Federal Emergency Management Agency</cntorg>
</cntorgp>
<cntpos>Mitigation Directorate</cntpos>
<cntaddr>
<addrtype>mailing address</addrtype>
<address>500 C Street, S.W.</address>
<city>Washington</city>
<state>District of Columbia</state>
<postal>20472</postal>
<country>USA</country>
</cntaddr>
<cntvoice>1-800-358-9616</cntvoice>
</cntinfo>
</ptcontac>
<secinfo>
<secclass>UNCLASSIFIED</secclass>
</secinfo>
<native Sync="FALSE">ESRI ArcCatalog 9.3.1.3500</native>
<crossref/>
<crossref>
<citeinfo>
<origin>Federal Emergency Management Agency</origin>
<pubdate>1998</pubdate>
<title>Flood Insurance Rate Map, STEVENS, WA</title>
<geoform>map</geoform>
<pubinfo>
<pubplace>Washington, DC</pubplace>
<publish>Federal Emergency Management Agency</publish>
</pubinfo>
</citeinfo>
</crossref>
<useconst>REQUIRED: Restrictions and legal prerequisites for using the data set after access is granted.</useconst>
<natvform Sync="TRUE">File Geodatabase Feature Class</natvform>
</idinfo>
<dataqual>
<attracc>
<attraccr>
The Q3 Flood Data are countywide vector files
derived from the FEMA Flood Insurance Rate Maps (FIRMS). The attribute
definitions may be found in the "Q3 Flood Data Specfications". Attribute
accuracy was tested by manual comparison of source graphic with hardcopy
plots and a symbolizied display on an interactive computer graphic system.
Selected attributes that could not be visually verified were individually
queried. In addition, an ARC/INFO Arc Macro Language (AML) software
program was applied to the dataset to test the attributes against a master
set of valid attributes for the specific data category, and a complete set
of valid attribute combinations. (See also Entity Attribute Information).
</attraccr>
<qattracc>
<attraccv>See Explanation</attraccv>
<attracce>
Attribute accuracy is described, where
present, with each attribute defined in the Entity and Attribute Section.
</attracce>
</qattracc>
</attracc>
<logic>
Polygon and chain-node topology are present.
Certain node-area-line relationships are collected or generated to satisfy
topological requirements. Some of these requirements include: lines must
begin and end at nodes, lines must connect to each other at nodes, lines
do not extend through nodes, left and right areas are defined for each
line segment and are consistent throughout the files, and the lines
representing the limits of the file neatlines are free of gaps. Tests of
logical consistency were performed by ARC/INFO software modules. Check
plots were made to test for leaks in all internal polygons.
</logic>
<complete>
Data completeness for Q3 Flood Data files reflect the
content of the source graphic. Features may have been eliminated or
generalized on the source graphic, due to scale and legibility
constraints. Flood risk data are developed for communities participating
in the NFIP, for use in insurance rating, and for floodplain management.
Flood hazard areas are determined using statistical analysis of records of
river flow, storm tides, and rainfall; information obtained through
consultation with the communities: floodplain topographic surveys; and
hydrological and hydraulic analysis. Both detailed and approximate
analyses are employed. Generally, detailed anaylses are used to generate
flood risk data only for developed or developing areas of communities.
For undeveloped areas where little or no development is expected to occur,
FEMA uses approximate analyses to generate flood risk data. Typically,
only drainage areas that are greater than one square mile are studied.
The Q3 Flood Data coverages may be derived from DFIRM-DLGs, from FIRM-
DLGs, from FIRMs digitized previously for emergency applications, or may
be newly created files. In Q3 Flood Data derived from older data sets,
certain items may not have been captured or may have been captured
differently from the current Q3 Flood Data specifications. In some cases,
preliminary FIRM data have been included in the Q3 Flood Data files.
These data have been provided to the community for their review and
comment and may be subject to change before their final publication date.
In addition, in some cases areas designated as Flood Prone Areas on
maps prepared by USGS and FIA have been included in the Q3 Flood Data
files. These areas were delineated based on available information on past
floods and are described by a unique attribute code that distinquishes
them from areas of 1% annual chance of flooding derived from FIRMs.
Flood Insurance Rate Maps continually undergo revisions and updates.
Some of these revisions are effected by letter (Letter of Map Revision
(LOMR), Letter of Map Amendment (LOMA)). Q3 Flood Data may not reflect
the most current information or information that is not mappable at the
publication scale of FIRM. To obtain the latest information, contact
the address listed under distributor.
</complete>
<posacc>
<horizpa>
<horizpar>
Specifications for the digitizing
of FIRMs to create the Q3 Flood Data are consistent with those
requirements for mapping at a scale of 1:24000. Horizontal control of
Q3 Flood Data was established using USGS quadrangle maps at 1:24000 or
other standard scales. Users should assess the horizontal positional
sources and the requirements of their application. With increased
frequency, large-scale spatial data sets are becoming widely available
for computer-based geographic information systems. Q3 Flood Data may be
used in combination with other digital spatial data, however, users
should be aware that scalar enlargements do not enhance the relative
accuracy of the Q3 Flood Data (i.e. 1:24000).
</horizpar>
</horizpa>
</posacc>
<lineage>
<srcinfo>
<srccite>
<citeinfo>
<origin>Federal Emergency Management Agency</origin>
<pubdate>1998</pubdate>
<title>Flood Insurance Rate Map, Q3 Data, Stevens County, Washington</title>
<geoform>map</geoform>
<pubinfo>
<pubplace>Washington, DC</pubplace>
<publish>Federal Emergency Management Agency</publish>
</pubinfo>
<othercit>
Panels:
530185 0000, 0013C, 0025C, 0050B, 0075B, 0086C, 0100C, 0125B, 0150B,
0154C, 0175C, 0200B, 0225B, 0250B, 0265B, 0275B, 0300B, 0325B, 0330B,
0350B, 0375B, 0400B, 0420B, 0425B, 0440B, 0450B, 0475B, 0500B, 0505B,
0525B, 0550B, 0575B, 0600B, 0625B, 0650B, 0675B, 0700B, 0725B
</othercit>
</citeinfo>
</srccite>
<srccite>
<citeinfo>
<origin>Federal Emergency Management Agency</origin>
<pubdate>1998</pubdate>
<title>Flood Insurance Rate Map, Q3 Data, City of Chewelah, Washington</title>
<geoform>map</geoform>
<pubinfo>
<pubplace>Washington, DC</pubplace>
<publish>Federal Emergency Management Agency</publish>
</pubinfo>
<othercit>
Panels:
530186 0001B
</othercit>
</citeinfo>
</srccite>
<srccite>
<citeinfo>
<origin>Federal Emergency Management Agency</origin>
<pubdate>1998</pubdate>
<title>Flood Insurance Rate Map, Q3 Data, City of Coleville, Washington</title>
<geoform>map</geoform>
<pubinfo>
<pubplace>Washington, DC</pubplace>
<publish>Federal Emergency Management Agency</publish>
</pubinfo>
<othercit>
Panels:
530187 0001B
</othercit>
</citeinfo>
</srccite>
<srccite>
<citeinfo>
<origin>Federal Emergency Management Agency</origin>
<pubdate>1998</pubdate>
<title>Flood Insurance Rate Map, Q3 Data, Town of Northport, Washington</title>
<geoform>map</geoform>
<pubinfo>
<pubplace>Washington, DC</pubplace>
<publish>Federal Emergency Management Agency</publish>
</pubinfo>
<othercit>
Panels:
530257 0000, 0001A, 0002A
</othercit>
</citeinfo>
</srccite>
<srccite>
<citeinfo>
<origin>Federal Emergency Management Agency</origin>
<pubdate>1998</pubdate>
<title>Flood Insurance Rate Map, Q3 Data, Town of Springdale, Washington</title>
<geoform>map</geoform>
<pubinfo>
<pubplace>Washington, DC</pubplace>
<publish>Federal Emergency Management Agency</publish>
</pubinfo>
<othercit>
Panels:
530264 0001A
</othercit>
</citeinfo>
</srccite>
<srcscale>6000-24000</srcscale>
<srcscale>6000</srcscale>
<srcscale>7200</srcscale>
<srcscale>4800</srcscale>
<srcscale>9600</srcscale>
<typesrc>paper</typesrc>
<typesrc>paper</typesrc>
<typesrc>paper</typesrc>
<typesrc>paper</typesrc>
<typesrc>paper</typesrc>
<srctime>
<timeinfo>
<sngdate>
<caldate>19960816</caldate>
</sngdate>
</timeinfo>
<srccurr>Effective Date</srccurr>
</srctime>
<srctime>
<timeinfo>
<sngdate>
<caldate>19860205</caldate>
</sngdate>
</timeinfo>
<srccurr>Effective Date</srccurr>
</srctime>
<srctime>
<timeinfo>
<sngdate>
<caldate>19850605</caldate>
</sngdate>
</timeinfo>
<srccurr>Effective Date</srccurr>
</srctime>
<srctime>
<timeinfo>
<sngdate>
<caldate>19760709</caldate>
</sngdate>
</timeinfo>
<srccurr>Effective Date</srccurr>
</srctime>
<srctime>
<timeinfo>
<sngdate>
<caldate>19750502</caldate>
</sngdate>
</timeinfo>
<srccurr>Effective Date</srccurr>
</srctime>
<srccitea>FIRM1</srccitea>
<srccitea>FIRM2</srccitea>
<srccitea>FIRM3</srccitea>
<srccitea>FIRM4</srccitea>
<srccitea>FIRM5</srccitea>
<srccontr>spatial and attribute information</srccontr>
<srccontr>spatial and attribute information</srccontr>
<srccontr>spatial and attribute information</srccontr>
<srccontr>spatial and attribute information</srccontr>
<srccontr>spatial and attribute information</srccontr>
</srcinfo>
<procstep>
<procdesc>
Q3 Flood Data format was produced by either
scanning or manually digitizing a hardcopy version of the graphic
materials. The scanning process captured the digital data and the
resulting raster data was vectorized and attributed on an
interactive editing station. Manual digitizing used a digitizing
table to capture the digital data; attribution was performed either
as the data was digitized or on an interactive edit station after
the digitizing was completed. The determination of the production
methodology was based on various criteria, including availability of
production systems. Four control points corresponding to the four
corners of the map were used for registration during manual
digitizing. A projection transformation was performed on the
coordinates used in the data collection and editing systems to
register the digital data to the Universal Transverse Mercator (UTM)
grid coordinates. The ARC/INFO coverage of the Q3 Flood Data was
generated, and it was also used to create the Q3-DLG file. The Q3
Flood Data was checked for position and attribute accuracy by
comparing plots of the digital data to the graphic source and by
symbolizing display on an interactive computer graphic system.
Selected attributes that could not be visually verified were
individual queried. In addition, an ARC/INFO Arc Macro Language
(AML) software program was applied to the dataset to test the
attributes against a master set of valid attributes for the specific
data category and a complete set of valid attribute combinations.
Source graphics were revised to reflect updates effected by Letters
of Map Change (Letter of Map Revision (LOMR), Letter of Map
Amendment (LOMA)). These revisions were included in the Q3 Flood
Data if they were mappable at the publication scale of the source
graphic. Once final, the ARC/INFO coverage was projected into a
geographic grid system using decimal degree latitude and longitude
coordinates and then converted into an ARC/INFO export file and
MapInfo native table files. In addition, the ARC/INFO coverage in
UTM coordinates was converted into a Digital Line Graph file. All
final files were checked for logical consistency and completeness.
</procdesc>
<srcused>withheld</srcused>
<procdate>1998</procdate>
</procstep>
<procstep>
<procdesc Sync="TRUE">Metadata imported.</procdesc>
<srcused Sync="FALSE">withheld</srcused>
<procdate Sync="TRUE">20081021</procdate>
<proctime Sync="TRUE">14261500</proctime>
</procstep>
</lineage>
</dataqual>
<spdoinfo>
<direct Sync="TRUE">Vector</direct>
<ptvctinf>
<esriterm Name="FEMAFloodData">
<efeatyp Sync="TRUE">Simple</efeatyp>
<efeageom Sync="TRUE" code="4"/>
<esritopo Sync="TRUE">FALSE</esritopo>
<efeacnt Sync="TRUE">811</efeacnt>
<spindex Sync="TRUE">TRUE</spindex>
<linrefer Sync="TRUE">FALSE</linrefer>
</esriterm>
</ptvctinf>
</spdoinfo>
<spref>
<horizsys>
<geodetic>
<horizdn Sync="TRUE">North American Datum of 1983</horizdn>
<ellips Sync="TRUE">Geodetic Reference System 80</ellips>
<semiaxis Sync="TRUE">6378137.000000</semiaxis>
<denflat Sync="TRUE">298.257222</denflat>
</geodetic>
<cordsysn>
<geogcsn Sync="TRUE">GCS_North_American_1983</geogcsn>
<projcsn Sync="TRUE">NAD_1983_UTM_Zone_11N</projcsn>
</cordsysn>
<planar>
<planci>
<plance Sync="TRUE">coordinate pair</plance>
<plandu Sync="TRUE">meters</plandu>
<coordrep>
<absres Sync="TRUE">0.000156</absres>
<ordres Sync="TRUE">0.000156</ordres>
</coordrep>
</planci>
</planar>
</horizsys>
<vertdef>
<altsys>
<altenc Sync="TRUE">Explicit elevation coordinate included with horizontal coordinates</altenc>
<altres Sync="TRUE">0.000100</altres>
</altsys>
</vertdef>
</spref>
<distinfo>
<distrib>
<cntinfo>
<cntorgp>
<cntorg>FEMA, Map Service Center</cntorg>
</cntorgp>
<cntaddr>
<addrtype>mailing address</addrtype>
<address>6730 Santa Barbara Court</address>
<city>Baltimore</city>
<state>Maryland</state>
<postal>21227-5832</postal>
<country>USA</country>
</cntaddr>
<cntvoice>1-800-358-9616</cntvoice>
<cntinst>
Data requests should include the full name of the
community or county and the Flood Insurance Rate Map panel number(s)
or the 7.5 minute quadrangle sheet area(s) covered by the request.
</cntinst>
</cntinfo>
</distrib>
<distliab>
No warranty expressed or implied is made by FEMA
regarding the utility of the data on any other system nor shall the act
of distribution constitute any such warranty. FEMA will warrant the
delivery of this product in a computer-readable format, and will offer
appropriate adjustment of credit when the product is determined
unreadable by correctly adjusted computer input peripherals, or when
the physical medium is delivered in damaged condition. Requests for
adjustment of credit must be made within 90 days from the date of this
shipment from the ordering site.
Standard_Ordering_Process
</distliab>
<stdorder>
<nondig>
Printed Digital Flood Insurance Rate Maps that
match this data set are available from FEMA at the Map Service Center,
cited above.
</nondig>
<digform>
<digtopt>
<onlinopt>
<computer>
<networka>
<networkr>http://www.fema.gov</networkr>
</networka>
<dialinst/>
</computer>
<accinstr>Online_Computer_Operating_System:</accinstr>
</onlinopt>
<offoptn>
<offmedia>CD-ROM</offmedia>
<recfmt>
ISO 9660
Metadata_Reference_Section
Metadata_Date 980804
Metadata_Contact
Contact_Organization_Primary Federal Emergency Management Agency
Contact_Position Mitigation Directorate
Contact_Address
Address_type mailing address
Address 500 C Street, S.W.
City Washington
State_or_Province District of Columbia
Postal_Code 20472
Country USA
Contact_Voice_Telephone 1-800-358-9616
Metadata_Standard_Name FGDC Content Standards for Digital Geospatial Metadata
Metadata_Standard_Version 19940608
Metadata_Time_Convention Local Time
Metadata_Security_Information
Metadata_Security_Classification_System None
Metadata_Security_Classification UNCLASSIFIED
Metadata_Security_Handling_Description None
</recfmt>
</offoptn>
</digtopt>
</digform>
</stdorder>
<resdesc Sync="TRUE">Downloadable Data</resdesc>
</distinfo>
<Esri>
<CreaDate>20221128</CreaDate>
<CreaTime>15062500</CreaTime>
<SyncOnce>FALSE</SyncOnce>
<SyncDate>20190730</SyncDate>
<SyncTime>16080600</SyncTime>
<ModDate>20190730</ModDate>
<ModTime>16080600</ModTime>
<DataProperties>
<itemProps>
<itemName Sync="TRUE">FEMAFloodData</itemName>
<imsContentType Sync="TRUE">002</imsContentType>
<nativeExtBox>
<westBL Sync="TRUE">2235233.674458</westBL>
<eastBL Sync="TRUE">2470859.440082</eastBL>
<southBL Sync="TRUE">301341.612009</southBL>
<northBL Sync="TRUE">747619.320501</northBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</nativeExtBox>
</itemProps>
<coordRef>
<type Sync="TRUE">Projected</type>
<geogcsn Sync="TRUE">GCS_North_American_1983_HARN</geogcsn>
<projcsn Sync="TRUE">NAD_1983_HARN_StatePlane_Washington_North_FIPS_4601_Feet</projcsn>
<peXml Sync="TRUE">&lt;ProjectedCoordinateSystem xsi:type='typens:ProjectedCoordinateSystem' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:xs='http://www.w3.org/2001/XMLSchema' xmlns:typens='http://www.esri.com/schemas/ArcGIS/10.5'&gt;&lt;WKT&gt;PROJCS[&amp;quot;NAD_1983_HARN_StatePlane_Washington_North_FIPS_4601_Feet&amp;quot;,GEOGCS[&amp;quot;GCS_North_American_1983_HARN&amp;quot;,DATUM[&amp;quot;D_North_American_1983_HARN&amp;quot;,SPHEROID[&amp;quot;GRS_1980&amp;quot;,6378137.0,298.257222101]],PRIMEM[&amp;quot;Greenwich&amp;quot;,0.0],UNIT[&amp;quot;Degree&amp;quot;,0.0174532925199433]],PROJECTION[&amp;quot;Lambert_Conformal_Conic&amp;quot;],PARAMETER[&amp;quot;False_Easting&amp;quot;,1640416.666666667],PARAMETER[&amp;quot;False_Northing&amp;quot;,0.0],PARAMETER[&amp;quot;Central_Meridian&amp;quot;,-120.8333333333333],PARAMETER[&amp;quot;Standard_Parallel_1&amp;quot;,47.5],PARAMETER[&amp;quot;Standard_Parallel_2&amp;quot;,48.73333333333333],PARAMETER[&amp;quot;Latitude_Of_Origin&amp;quot;,47.0],UNIT[&amp;quot;Foot_US&amp;quot;,0.3048006096012192],AUTHORITY[&amp;quot;EPSG&amp;quot;,2926]]&lt;/WKT&gt;&lt;XOrigin&gt;-117104300&lt;/XOrigin&gt;&lt;YOrigin&gt;-99539600&lt;/YOrigin&gt;&lt;XYScale&gt;3048.0060960121928&lt;/XYScale&gt;&lt;ZOrigin&gt;-100000&lt;/ZOrigin&gt;&lt;ZScale&gt;10000&lt;/ZScale&gt;&lt;MOrigin&gt;-100000&lt;/MOrigin&gt;&lt;MScale&gt;10000&lt;/MScale&gt;&lt;XYTolerance&gt;0.0032808333333333331&lt;/XYTolerance&gt;&lt;ZTolerance&gt;0.001&lt;/ZTolerance&gt;&lt;MTolerance&gt;0.001&lt;/MTolerance&gt;&lt;HighPrecision&gt;true&lt;/HighPrecision&gt;&lt;WKID&gt;2926&lt;/WKID&gt;&lt;LatestWKID&gt;2926&lt;/LatestWKID&gt;&lt;/ProjectedCoordinateSystem&gt;</peXml>
<csUnits Sync="TRUE">Linear Unit: Foot_US (0.304801)</csUnits>
</coordRef>
</DataProperties>
<ArcGISFormat>1.0</ArcGISFormat>
<ArcGISstyle>FGDC CSDGM Metadata</ArcGISstyle>
</Esri>
<dataIdInfo>
<envirDesc Sync="TRUE"> Version 6.2 (Build 9200) ; Esri ArcGIS 10.5.1.7333</envirDesc>
<dataLang>
<languageCode Sync="TRUE" country="USA" value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</dataLang>
<idCitation>
<resTitle Sync="TRUE">FEMAFloodData</resTitle>
<presForm>
<PresFormCd Sync="TRUE" value="005"/>
</presForm>
</idCitation>
<spatRpType>
<SpatRepTypCd Sync="TRUE" value="001"/>
</spatRpType>
<dataExt>
<geoEle>
<GeoBndBox esriExtentType="search">
<westBL Sync="TRUE">-118.412672</westBL>
<eastBL Sync="TRUE">-117.373250</eastBL>
<northBL Sync="TRUE">49.023151</northBL>
<southBL Sync="TRUE">47.776135</southBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</GeoBndBox>
</geoEle>
</dataExt>
<geoBox esriExtentType="decdegrees">
<westBL Sync="TRUE">-118.429122</westBL>
<eastBL Sync="TRUE">-117.419719</eastBL>
<northBL Sync="TRUE">49.005483</northBL>
<southBL Sync="TRUE">47.786413</southBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</geoBox>
<descKeys>
<thesaName uuidref="723f6998-058e-11dc-8314-0800200c9a66"/>
<keyword Sync="TRUE">002</keyword>
</descKeys>
</dataIdInfo>
<metainfo>
<langmeta Sync="TRUE">en</langmeta>
<metstdn Sync="TRUE">FGDC Content Standards for Digital Geospatial Metadata</metstdn>
<metstdv Sync="TRUE">FGDC-STD-001-1998</metstdv>
<mettc Sync="TRUE">local time</mettc>
<metc>
<cntinfo>
<cntorgp>
<cntper>REQUIRED: The person responsible for the metadata information.</cntper>
<cntorg>REQUIRED: The organization responsible for the metadata information.</cntorg>
</cntorgp>
<cntaddr>
<addrtype>REQUIRED: The mailing and/or physical address for the organization or individual.</addrtype>
<city>REQUIRED: The city of the address.</city>
<state>REQUIRED: The state or province of the address.</state>
<postal>REQUIRED: The ZIP or other postal code of the address.</postal>
</cntaddr>
<cntvoice>REQUIRED: The telephone number by which individuals can speak to the organization or individual.</cntvoice>
</cntinfo>
</metc>
<metd Sync="TRUE">20110518</metd>
</metainfo>
<mdLang>
<languageCode Sync="TRUE" value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</mdLang>
<mdStanName Sync="TRUE">ISO 19115 Geographic Information - Metadata</mdStanName>
<mdStanVer Sync="TRUE">DIS_ESRI1.0</mdStanVer>
<mdChar>
<CharSetCd Sync="TRUE" value="006"/>
</mdChar>
<mdHrLv>
<ScopeCd Sync="TRUE" value="005"/>
</mdHrLv>
<mdHrLvName Sync="TRUE">dataset</mdHrLvName>
<distInfo>
<distributor>
<distorTran>
<onLineSrc>
<orDesc Sync="TRUE">002</orDesc>
<linkage Sync="FALSE">withheld</linkage>
<protocol Sync="TRUE">Local Area Network</protocol>
</onLineSrc>
</distorTran>
<distorFormat>
<formatName Sync="TRUE">File Geodatabase Feature Class</formatName>
</distorFormat>
</distributor>
<distFormat>
<formatName Sync="TRUE">File Geodatabase Feature Class</formatName>
</distFormat>
</distInfo>
<refSysInfo>
<RefSystem>
<refSysID>
<identCode Sync="TRUE" code="2926">NAD_1983_UTM_Zone_11N</identCode>
<idCodeSpace Sync="TRUE">EPSG</idCodeSpace>
<idVersion Sync="TRUE">8.9.3(9.0.0)</idVersion>
</refSysID>
</RefSystem>
</refSysInfo>
<spatRepInfo>
<VectSpatRep>
<geometObjs Name="FEMAFloodData">
<geoObjTyp>
<GeoObjTypCd Sync="TRUE" value="002"/>
</geoObjTyp>
<geoObjCnt Sync="TRUE">811</geoObjCnt>
</geometObjs>
<topLvl>
<TopoLevCd Sync="TRUE" value="001"/>
</topLvl>
</VectSpatRep>
</spatRepInfo>
<eainfo>
<detailed Name="FEMAFloodData">
<enttyp>
<enttypl Sync="TRUE">FEMAFloodData</enttypl>
<enttypt Sync="TRUE">Feature Class</enttypt>
<enttypc Sync="TRUE">811</enttypc>
</enttyp>
<attr>
<attrlabl Sync="TRUE">OBJECTID</attrlabl>
<attalias Sync="TRUE">OBJECTID</attalias>
<attrtype Sync="TRUE">OID</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Internal feature number.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape</attrlabl>
<attalias Sync="TRUE">Shape</attalias>
<attrtype Sync="TRUE">Geometry</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Feature geometry.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Coordinates defining the features.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">FEMA_</attrlabl>
<attalias Sync="TRUE">FEMA_</attalias>
<attrtype Sync="TRUE">Integer</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">FEMA_ID</attrlabl>
<attalias Sync="TRUE">FEMA_ID</attalias>
<attrtype Sync="TRUE">Integer</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">FIPS</attrlabl>
<attalias Sync="TRUE">FIPS</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">5</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">COMMUNITY</attrlabl>
<attalias Sync="TRUE">COMMUNITY</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">FIRM_PANEL</attrlabl>
<attalias Sync="TRUE">FIRM_PANEL</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">11</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">QUAD</attrlabl>
<attalias Sync="TRUE">QUAD</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">ZONE_</attrlabl>
<attalias Sync="TRUE">ZONE_</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">5</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">FLOODWAY</attrlabl>
<attalias Sync="TRUE">FLOODWAY</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">5</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">COBRA</attrlabl>
<attalias Sync="TRUE">COBRA</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">9</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">SFHA</attrlabl>
<attalias Sync="TRUE">SFHA</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">3</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">SYMBOL</attrlabl>
<attalias Sync="TRUE">SYMBOL</attalias>
<attrtype Sync="TRUE">Integer</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">PANEL_TYP</attrlabl>
<attalias Sync="TRUE">PANEL_TYP</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">ST_FIPS</attrlabl>
<attalias Sync="TRUE">ST_FIPS</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">2</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">CO_FIPS</attrlabl>
<attalias Sync="TRUE">CO_FIPS</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">3</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">STATE</attrlabl>
<attalias Sync="TRUE">STATE</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">2</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">PCOMM</attrlabl>
<attalias Sync="TRUE">PCOMM</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">PANEL</attrlabl>
<attalias Sync="TRUE">PANEL</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">5</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">LAT</attrlabl>
<attalias Sync="TRUE">LAT</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">2</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">LONG_</attrlabl>
<attalias Sync="TRUE">LONG_</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">3</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">QUAD_UNIT</attrlabl>
<attalias Sync="TRUE">QUAD_UNIT</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">2</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape_Length</attrlabl>
<attalias Sync="TRUE">Shape_Length</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Length of feature in internal units.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Positive real numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape_Area</attrlabl>
<attalias Sync="TRUE">Shape_Area</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Area of feature in internal units squared.</attrdef>
<attrdefs Sync="TRUE">ESRI</attrdefs>
<attrdomv>
<udom Sync="TRUE">Positive real numbers that are automatically generated.</udom>
</attrdomv>
</attr>
</detailed>
</eainfo>
<mdDateSt Sync="TRUE">20190730</mdDateSt>
</metadata>
